Alpacas must be suitably identified applicable to the production system and current regulations.

Approved activities Category
4. Ear marking/tagging of livestock 3
6. Hoof paring: sheep, goats & alpacas 3
9. Shearing of alpacas & llamas 4

Routine husbandry activities for alpacas include:

  • internal parasite control
  • external parasite control
  • vaccination
  • identification (microchipping, ear tagging)
  • castration
  • hoof trimming
  • teeth trimming (this is to be done by an experienced person only)
  • shearing.

It is essential that appropriate facilities and equipment be used for these practices.

Castration can only be carried out by a veterinarian.

Teeth trimming

A veterinarian should be consulted in reference to trimming alpaca’s teeth. Alpacas only have incisor teeth in the lower jaw and bite their food against a pad in the upper jaw. They have both upper and lower molars.

Unfortunately there is a lot of misinformation regarding teeth trimming, which often leads to cruelty. Alpaca teeth must only be trimmed when necessary. Frequency of teeth trimming depends upon the food that the alpaca eats. Animals with a very high fibre diet with access to branches and tougher grass species will need less frequent teeth trimming as opposed to alpacas fed primarily on concentrates and chaff.

Shearing

Regardless of whether an alpaca is being used for fleece production, routine shearing must occur each spring. This prevents the alpacas from becoming too hot and suffering heat stress in the summer periods. Alpacas are shorn using an alternative method to both sheep and goats. An experienced alpaca shearer should always be employed to perform this task.

Alpacas are restrained by being stretched out on the floor or low table and having their legs tied to wooden spacers. A handler holds the head of the animal. When one side of the animal has been shorn, the animal is flipped over and the other side is shorn. It is essential that a handler holds the alpaca’s head throughout the entire process as there is serious risk of neck injury if the alpaca is to struggle.

Alpaca shearing requires experience and expertise and should never be performed entirely by inexperienced handlers as it can result in injury to both animal and handler.

Alpaca shearing

Watch Alpaca shearing. (2:00)

Description and images of shearing.

Narrator: Dani – agriculture teacher

Shearing is the management practice that we do every Spring on the alpacas. It’s the removal of fleece from their saddles, their neck and their legs and ensures that we can get the product from them to the market and on for processing.

Alpacas need to be shorn, they come from very cold aspects of Peru. And to live in a country like Australia it’s quite hot and so over Summer they need their fleece to be removed so they’re much more comfortable.

Alpacas, unlike sheep are not as compliant at sitting still and shearing for alpacas is a three person job, rather than a one person job.

On the day of shearing you would normally bring the alpacas in, halter them and then bring them in to have their fleece sample taken. This is normally taken from the mid-section of their saddle.

We send this off for processing and for analysing to check for the staple length, the micron, the density and the comfort factor.

Once you’ve taken the fibre sample you would then move the animal into the shearing table or onto the shearing floor. The animal would then be tied down with its front legs stretched out and its back legs stretched out. It would have a heavy weight placed over its neck to ensure that it doesn’t thrash around. Although it would appear to be distressing in the short term for the animals, shearing over the long term is much better.

What it does is it ensures that the animals can remain cool over Summer, it also reduces the risk of the animals becoming wool blind.

We divide it into three different sections, the saddle, the neck and the scrap. The best wool comes from the saddle and this is kept aside. The scrap is basically thrown away. The neck is the next area of good quality wool.

If the animal is more than one colour you would also at this stage separate out the colour. At this stage you can also skirt the wool and remove any of the hair segments from there. If the animal is particularly even in its wool class, you would often have large amounts of the neck that are very high quality as in the leg portion.

[End of transcript]

Nail trimming

Alpacas toenails require regular trimming otherwise they become long, deformed and uncomfortable for the alpaca. Dry, rocky paddocks will result in less frequent need for trimming, while wet, soft ground will result in more frequent hoof trimming being required. Seasonal changes should be taken into consideration as the alpacas will need more regular trimming during wetter months.

Hoof paring

Watch Hoof paring. (0:27)

Description and images of hoof paring

Narrator: agriculture student

To start with the alpaca must be restrained using a halter and lead. A skilled operator such as my Ag teachers or someone who knows how to hoof pare then uses a pair of secateurs or shears to trim off the excess growth of the hoof.

If this is done regularly the alpaca eventually becomes used to hoof paring and husbandry practice becomes easier to do. This must be done regularly to minimise the chances of deformed feet and legs in the alpacas.

[End of transcript]

NLIS tags

Registered alpacas are identified with a brass ear tag in the left ear for males and right ear for females. An additional plastic ear tag can be placed in the opposite ear.

The alpaca and llama industry have identified that the introduction of a national identification and traceability scheme is integral to the future development of the industry.

Although NLIS is only just starting to regulate the identification and movement of alpacas and llamas in Australia, rules have been written in draft describing the regulations of tagging and movement of alpacas within Australia. Some of these major rules include:

  • all alpacas and llamas must be ear tagged with an NLIS tag in the left ear for males and the right ear for females
  • alpacas will have a breeder tag (green)and a post breeder tag(pink) for when they move off the property where they were born
  • NLIS tags must never be removed until death or slaughter
  • additional tags should never be attached
  • property identification codes should be stamped on the NLIS ear tag
  • in the event of an emergency such as flood or fire, animals may be moved without an NLIS tag with approval from authorities, however in all normal situations animals must be tagged before being moved to a new property or to a sale yard
  • properties must be registered with a property identification code (PIC).

NLIS Alpaca and llama

Return to top of page Back to top